Yellow Bricks

by Duncan Epping

VMware

vSAN 7.0 U3 enhanced stretched cluster resiliency, what is it?

· ·

I briefly discussed the enhanced stretched cluster resiliency capability in my vSAN 7.0 U3 overview blog. Of course, immediately questions started popping up. I didn’t want to go too deep in that post as I figured I would do a separate post on the topic sooner or later. What does this functionality add, and in which particular scenario?

In short, this enhancement to stretched clusters prevents downtime for workloads in a particular failure scenario. So the question then is, what failure scenario? Let’s take a look at this diagram first of a typical stretched vSAN cluster deployment.

If you look at the diagram you see the following: Datacenter A, Datacenter B, Witness. One of the situations customers have found themselves in is that Datacenter A would go down (unplanned). This of course would lead to the VMs in Datacenter A being restarted in Datacenter B. Unfortunately, sometimes when things go wrong, they go wrong badly, in some cases, the Witness would fail/disappear next. Why? Bad luck, networking issues, etc. Bad things just happen. If and when this happens, there would only be 1 location left, which is Datacenter B.

Now you may think that because Datacenter B typically will have a full RAID set of the VMs running that they will remain running, but that is not true. vSAN looks at the quorum of the top layer, so if 2 out of 3 datacenters disappear, all objects impacted will become inaccessible simply as quorum is lost! Makes sense right? We are not just talking about failures right, could also be that Datacenter A has to go offline for maintenance (planned downtime), and at some point, the Witness fails for whatever reason, this would result in the exact same situation, objects inaccessible.

Starting with 7.0 U3 this behavior has changed. If Datacenter A fails, and a few (let’s say 5) minutes later the witness disappears, all replicated objects would still be available! So why is this? Well in this scenario, if Datacenter A fails, vSAN will create a new votes layout for each of the objects impacted. It basically will assume that the witness can fail and give all components on the witness 0 votes, on top of that it will give the components in the active site additional votes so that we can survive that second failure. If the witness would fail, it would not render the objects inaccessible as quorum would not be lost.

Now, do note, when a failure occurs and Datacenter A is gone, vSAN will have to create a new votes layout for each object. If you have a lot of objects this can take some time. Typically it will take a few seconds per object, and it will do it per object, so if you have a lot of VMs (and a VM consists of various objects) it will take some time. How long, well it could be five minutes. So if anything happens in between, not all objects may have been processed, which would result in downtime for those VMs when the witness would go down, as for that VM/Object quorum would be lost.

What happens if Datacenter A (and the Witness) return for duty? Well at that point the votes would be restored for the objects across locations and the witness.

Pretty cool right?!

vSphere 7.0 U3 contains two great vCLS enhancements

· ·

I have written about vCLS a few times, so I am not going to explain what it is or what it does (detailed blog here). I do want to talk about what is part of vSphere 7.0 U3 specifically though as I feel these features are probably what most folks have been waiting for. Starting with vSphere 7.0 U3 it is now possible to configure the following for vCLS VMs:

  1. Preferred Datastores for vCLS VMs
  2. Anti-Affinity for vCLS VMs with specific other VMs

I created a quick demo for those who prefer to watch videos to learn these things if you don’t skip to the text below. Oh and before I forget, a bonus enhancement is that the vCLS VMs now have a unique name, this was a very common request from customers.

Why would you need the above functionality? Let’s begin with the “preferred datastore” feature, this allows you to specify where the vCLS VMs need to be provisioned to from a storage point of view. This would be useful in a scenario where you have a number of datastores that you would prefer to avoid. Examples could be datastores that are replicated or a datastore that is only intended to be used for ISOs and templates, or maybe you prefer to provision on hybrid storage versus flash storage.

So how do you fix this? Well, it is simple, you click on your cluster object. You then click on “Configure”, and on “Datastores” under “vSphere Cluster Services”. Now you will see “VCLS Allowed”, if you click on “ADD” you now will be able to select the datastores to which these vCLS VMs should be provisioned.

Next up Anti-Affinity for vCLS. You would this feature for situations where for instance a single workload needs to be able to solely run on a host, something like SAP for instance. In order to achieve this, you can use anti-affinity rules. We are not talking about regular anti-affinity rules. This is the very first time a brand new mechanism is used on-premises. I am talking about compute policies. Compute policies have been available for VMware Cloud on AWS customers for a while, but now are also appear to be coming to on-prem customers. What does it do? It enables you to create “anti-affinity” rules for vCLS VMs and specific other VMs in your environment by creating Compute Policies and using Tags!

How does this work? Well, you go to “Policies and Profiles” and then click “Compute Policies”. Now you can click “ADD” and create a policy. You now select “Anti Affinity with vSphere Cluster Services (vCLS) VMs”. Then you select the Tag you created for the VMs that should not run on the same hosts as the vCLS VMs, and then you click create. The vCLS VM Scheduler will then ensure that the vCLS VMs will not run on the same hosts as the tagged VMs. If there’s a conflict, the vCLS Scheduler will move away the vCLS VMs to other hosts within the cluster. Let’s reiterate that, the vCLS VMs will be vMotioned to another host in your cluster, the tagged VMs will not be moved!

Hope that helps!

vSAN 7.0 U3 feature overview

· ·

In this blog post, I want to go over the features which have been released for vSAN as part of 7.0 U3. It is not going to be a deep dive, just a simple overview as most features speak for themselves! Let’s list the feature first, and then discuss some of them individually.

  • Cluster Shutdown feature
  • vLCM support for Witness Appliance
  • Skyline Health Correlation
  • IO Trip Analyzer
  • Nested Fault Domains for 2-Node Clusters
  • Enhanced Stretched Cluster durability
  • Access Based Enumeration for SMB shares via vSAN File Services

I guess the Cluster Shutdown feature speaks for itself. It basically enables you to power off all the hosts in a cluster when doing maintenance. Even if those hosts contain vCenter Server! If you want to trigger a shutdown, just right click the cluster object, go to vSAN, select “shutdown cluster” and follow the 2-step wizard. Pretty straight forward. Do note, besides the agent VMs, you will need to power-off the other VMs first. (yes, I requested this to be handled by the process as well in the future!)

The Skyline Health Correlation feature is very useful for customers who are seeing multiple alarms being triggered and are not sure what to do. In this scenario, starting with 7.0 U3, vSAN will now understand the correlation between the events and inform you what the issue is (most likely) and show you which other tests it would impact. This should enable you to fix the problem faster than before.

IO Trip Analyzer is also brand new in 7.0 U3. I actually wrote a blog post on the subject separately and included a demo, I would recommend watching that one. But if you just want the short summary, the IO Trip Analyzer basically provides an overview of latency introduced at every layer in the form of a diagram!

Nested Fault Domains for 2-node clusters has been on the “wish list” of some of our customers for a while. It is a very useful feature for those customers who want to be able to tolerate multiple failures even in a 2-node configuration. The feature requires you to have at least 3 disk groups per host, in each of the 2 hosts, and will then enable you to have “RAID-1” across those two hosts and RAID-1 within the host (Or RAID-5 if you have sufficient disk groups). If a host fails, and then a disk fails in the surviving host, the VMs would still be available. Basically a feature for customers who don’t need a lot of compute power (3 hosts or more), but do need added resiliency!

Enhanced Stretched Cluster durability (also applies to 2-node) is a feature that Cormac and I requested a while back. We requested this feature as we had heard from a few customers that unfortunately, they had found themselves in a situation where a datacenter would go offline, followed by the witness going down. This would then result in the VMs (only those which were stretched of course) in the remaining location also be unusable, as 2 out of the 3 parts of the RAID tree would be gone. This would even be the case in a situation where you would have a fully available RAID-1 / RAID-5 / RAID-6 tree in the remaining datacenter. This new feature now prevents this scenario!

Last, but not least, we now have support for Access Based Enumeration for SMB shares via vSAN File Services. What does this mean? Pre vSAN 7.0 U3, if a user had access to a file share the user would be able to see all folders/directories in this share. Starting with 7.0 U3 when looking at the share, only the folders that you have the appropriate permissions for will be displayed! (More about ABE here)

vSAN 7.0 u3: IO Trip Analyzer

· ·

In vSAN 7.0 U1 a new feature was introduced called IO Insight. IO Insight basically enabled customers to profile workloads and it provided them with a lot of information around the type of IO the workload was producing. In vSAN 7.0 U3 this is taken one step further with the IO Trip Analyzer. The IO Trip Analyzer provides details around the, yes you guessed it, trip of the IO. It basically informs you about the latency introduced at the various stages of the path the IO has to travel to end up on the capacity layer of vSAN.

Why would you need this? This tool is going to be very useful and will complement IO Insight when it comes to doing performance troubleshooting, or when it comes to getting a better understanding of the IO path. IO Trip Analyzer can be easily enabled by going to the “Monitor” section of the VM you want to enable it for.

You simply click “Run new test” and then specify for how long you want to analyze the VM (between 5 and 60 minutes). When the specified amount has passed you simply click on “View Result” and this will then provide you a diagram of the VM and its components.

When you then click on one of the dots, you will be able to see what kind of latency is introduced on the layer. It will provide you a potential cause for the latency and it will provide you some insights in terms of how you can potentially resolve the latency. Also, if there’s a significant amount of latency introduced then of course the diagram will show this through colors for the respective layer where the latency is introduced.

Before I share the demo, I should probably mention that there are some limitations in this first release of the IO Trip Analyzer (Not supported: Stretched Clusters, CNS persistent volumes, iSCSI etc) but I suspect those limitations will be lifted with every follow-up release of vSAN. I truly feel that this is a big improvement when it comes to performance troubleshooting, and I can’t wait to see what the vSAN team is planning for the future of this release.

Booting ESXi from SD/USB devices? Time to reconsider when buying new hardware!

· ·

We’ve all seen those posts from people about worn-out SD/USB devices, or maybe even experience it ourselves at some point in time. Most of you reading this probably also knew there was an issue with 7.0 U2, which resulted in USB/SD devices wearing out a lot quicker. Those issues have been resolved with the latest patch for 7.0 U2. It has, however, resulted in a longer debate around whether SD/USB devices should still be used for booting ESXi, and it seems that the jury has reached a verdict.

On the 16th of September, a KB article was published by VMware, which contains statements around the future of SD/USB devices. I can be short about it, if you are buying new hardware make sure to have a proper persistent storage device, USB/SD is not the right choice going forward! Why? The volume of reads/writes to and from the OS-DATA partition continues to increase with every release, which means that the lower grade devices will simply wear out faster. Now, I am not going to repeat word for word what is mentioned in the KB, I would just like to urge everyone to read the KB article, and make sure to plan accordingly! Personally, I am a fan of M.2 flash devices for booting. They are not too expensive(greenfield deployments), plus they can provide enterprise-grade persistent storage to store all your ESXi related data. Make sure to follow the requirements around endurance though!