• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Yellow Bricks

by Duncan Epping

  • Home
  • Unexplored Territory Podcast
  • HA Deepdive
  • ESXTOP
  • Stickers/Shirts
  • Privacy Policy
  • About
  • Show Search
Hide Search

vSphere 5.0 HA restarting of VMs with no access to storage?

Duncan Epping · Jun 6, 2012 ·

I had a question today around the restart of VMs with no access to storage by HA. The question was if HA would try to restart the VM and time out after 5 times. With the follow up question, if HA would try again when the storage would return for duty.

By default HA will try to restart a VM up to 5 times in roughly 30 minutes. If the master does not exceed it will stop trying. On top of that  HA manages a “compatibility list”. This list will contain the details around which VM can be restarted and where. In other words; which hosts have access to the datastores and network portgroup required for this VM to successfully power-on. Now if for whatever reason there are no compatible hosts available for the restart then HA will not try to restart the VM.

But what if the problem is resolved? As soon as the problem is resolved, and reported as such, the compatibility list will be updated. When the list is updated HA will continue with the restarts again.

It might also be good to know that if for whatever reason the master fails, a new master will continue trying to restart the VM. It will start with 5 new attempts and not take the number of restart attempts that the previous master did into account.

 

** Disclaimer: This article contains references to the words master and/or slave. I recognize these as exclusionary words. The words are used in this article for consistency because it’s currently the words that appear in the software, in the UI, and in the log files. When the software is updated to remove the words, this article will be updated to be in alignment. **

VM Monitoring only using VMware Tools heartbeat?

Duncan Epping · Jun 5, 2012 ·

I had this question twice this week and did a quick search on my blog and I wrote an article about it a while back, but I figured it wouldn’t hurt to repeat some of that and expand on it. I copied / pasted this from part from our book as I think it it spot on!

VM/App monitoring uses a heartbeat mechanism kind of similar to HA. If heartbeats, and, in this case, VMware Tools heartbeats, are not received for a specific (and configurable) amount of time, the virtual machine will be restarted. These heartbeats are monitored by the HA agent and are not sent over a network, but stay local to the host.

Although the heartbeat produced by VMware Tools is reliable, VMware added a further verification mechanism. To avoid false positives, VM Monitoring also monitors I/O activity of the virtual machine. When heartbeats are not received AND no disk or network activity has occurred over the last 120 seconds, per default, the virtual machine will be reset. Changing the advanced setting “das.iostatsInterval” can modify this 120-second interval.

Which isolation response should I use?

Duncan Epping · May 31, 2012 ·

I wrote this article about split brain scenarios for the vSphere Blog. Based on this article I received some questions around which “isolation response” to use. This is not something that can be answered by a simple “recommended practice” and applied to all scenarios out there. Note that below has got everything to do with your infrastructure. Are you using IP-Based storage? Do you have a converged network? All of these impact the decision around the isolation response.

The following table however could be used to make a decision:

Likelihood that host will retain access to VM datastores Likelihood that host will retain access to VM network Recommended Isolation policy Explanation
Likely Likely Leave Powered On VM is running fine so why power it off?
Likely Unlikely Either Leave Powered On or Shutdown Choose shutdown to allow HA to restart VMs on hosts that are not isolated and hence are likely to have access to storage
Unlikely Likely Power Off Use Power Off to avoid having two instances of the same VM on the VM network
Unlikely Unlikely Leave Powered On or Power Off Leave Powered on if the VM can recover from the network/datastore outage if it is not restarted because of the isolation, and Power Off if it likely can’t.

VMworld session voting

Duncan Epping · May 29, 2012 ·

I submitted several sessions. Of course, just like everyone else, I could use your help when it comes to voting. These are the ones I submitted (or are part of):

  • 1154 – vCloud Director Infrastructure Resiliency – DR of the Cloud – Chris Colotti and Duncan Epping
    In this session Chris and I will focus on vCloud Director infrastructure resilience. Although there is no direct vCloud Director and Site Recovery manager integration, we will look at how to replicate the data, what applications are primary targets, how to size environments, how to maintain multi-tenancy, and what to avoid when architecting these solutions.
  • 1159 – Architecting and Operating a vSphere Metro Storage Cluster – Lee Dilworth and Duncan Epping
    In this session Lee Dilworth and I will discuss the design and operational considerations for vSphere Metro Storage Clusters environments, also commonly referred to as stretched cluster environments. Best practices around implementation and design will be shared. Various failure scenarios which can occur in a stretched storage environment are discussed in-depth including how vSphere 5 responds to these failures.
  • 1202 – Cloud Infrastructure Architecture and Operations Q&A – Chris Colotti, Kamau Wanguhu, Aidan Dalgleish and Duncan Epping
    This is the only session at VMworld which will allow you to freely ask four VMware Certified Design Experts (VCDX) questions around how to architect and operate your cloud infrastructure. Our panel holds expertise on Networking, Storage, vCloud Director and vSphere and consists of Chris Colotti (VCDX037), Kamau Wanguhu (VCDX003), Aidan Dalgleish (VCDX010) and Duncan Epping (VCDX007). We will help you make the right decisions while explaining some of the underlying fundamental concepts of the Cloud Infrastructure Suite allowing you to optimize your operations and architecture. This is one of those sessions that you cannot afford to miss out on!
  • 1504 – Ask the Expert vBloggers – Scott Lowe, Duncan Epping, Rick Scherer, Frank Denneman, Chad Sakac
    One of the highest rated sessions at VMworld is back for it’s fifth year! Come meet four VMware Certified Design Experts (VCDX) on stage answering your questions. We get the top Virtualization Bloggers in the industry and get them on stage answering your questions in a wide array of topics.

Of course there are a million other great sessions you should be voting for… Chris Colotti, David Hill, Frank Denneman, Cormac Hogan, Tom Stephens and many others submitted excellent sessions, don’t forget to vote for them as well. Thanks for taking the time!

vFabric Application Director

Duncan Epping · May 29, 2012 ·

I am not going to pretend I am the devops expert here but I was playing around with vFabric Application Director last week and I thought it was really cool solution. I can really see the value for development teams, but also for large support services teams and even education org’s. Being able to create deployment / configuration plans for application stacks by simply dragging and dropping is something I would have loved to have when I supported various development and support teams in a previous life.

I could have saved a lot of time… during physical machine and virtual machine provisioning, installation of software (automated if I was lucky), configuration and figuring out how it all worked with this weird database flavor or new Operating System. With App Director, yes you will need to figure all of it out once, you can easily repeat the same steps over and over again. You can select different Guest OS’s, different databases, different apps etc.

If you are in the same boat as I once was I would suggest watching this video and giving App Director a test run just to figure out if it can simplify your life!

  • « Go to Previous Page
  • Page 1
  • Interim pages omitted …
  • Page 231
  • Page 232
  • Page 233
  • Page 234
  • Page 235
  • Interim pages omitted …
  • Page 502
  • Go to Next Page »

Primary Sidebar

About the Author

Duncan Epping is a Chief Technologist and Distinguished Engineering Architect at Broadcom. Besides writing on Yellow-Bricks, Duncan is the co-author of the vSAN Deep Dive and the vSphere Clustering Deep Dive book series. Duncan is also the host of the Unexplored Territory Podcast.

Follow Us

  • X
  • Spotify
  • RSS Feed
  • LinkedIn

Recommended Book(s)

Also visit!

For the Dutch-speaking audience, make sure to visit RunNerd.nl to follow my running adventure, read shoe/gear/race reviews, and more!

Do you like Hardcore-Punk music? Follow my Spotify Playlist!

Do you like 80s music? I got you covered!

Copyright Yellow-Bricks.com © 2026 · Log in