Yellow Bricks

by Duncan Epping

BC-DR

ESX 3.5 Update 2 available now!

· ·

Am I the first one to notice this? VMware just released Update 2 for ESX(i) 3.5 and a whole bunch of new patches!

So what’s new?

  • Windows Server 2008 support – Windows Server 2008 (Standard, Enterprise, and Datacenter editions) is supported as a guest operating system. With VMware’s memory overcommit technology and the reliability of ESX, virtual machine density can be maximized with this new guest operating system to achieve the highest degree of ROI. Guest operating system customizations and Microsoft Cluster Server (MSCS) are not supported with Windows Server 2008.
  • Enhanced VMotion Compatibility – Enhanced VMotion compatibility (EVC) simplifies VMotion compatibility issues across CPU generations by automatically configuring server CPUs with Intel FlexMigration or AMD-V Extended Migration technologies to be compatible with older servers. Once EVC is enabled for a cluster in the VirtualCenter inventory, all hosts in that cluster are configured to ensure CPU compatibility for VMotion. VirtualCenter will not permit the addition of hosts which cannot be automatically configured to be compatible with those already in the EVC cluster.
  • Storage VMotion – Storage VMotion from a FC/iSCSI datastore to another FC/iSCSI datastore is supported. This support is extended on ESX/ESXi 3.5 Update 1 as well.
  • VSS quiescing support – When creating quiesced snapshot of Windows Server 2003 guests, both filesystem and application quiescing are supported. With Windows Server 2008 guests, only filesystem quiescing is supported. For more information, see the Virtual Machine Backup Guide and the VMware Consolidated Backup 1.5 Release Notes.
  • Hot Virtual Extend Support – The ability to extend a virtual disk while virtual machines are running is provided. Hot extend is supported for vmfs flat virtual disks without snapshots opened in persistent mode.
  • 192 vCPUs per host – VMware now supports increasing the maximum number of vCPUs per host 192 given that the maximum number of Virtual Machines per host is 170 and that no more than 3 virtual floppy devices or virtual CDROM devices are configured on the host at any given time. This support is extended on ESX 3.5 Update 1 as well.

I really really like the VSS support for Snapshots, especially for VCB this is a great feature! And what about hot extending your harddisk, this makes a VMFS datastore as flexible as a RDM datastore!

For Hardware there are also a couple of really great additions:

  • 8Gb Fiber Channel HBAs – Support is available for 8Gb fiber channel HBAs. See the I/O Compatibility Guide for ESX Server 3.5 and ESX Server 3i for details.
  • SAS arrays – more configurations are supported.  See the Storage/SAN Compatibility Guide for ESX Server 3.5 and ESX Server 3i for details.
  • 10 GbE iSCSI initiator – iSCSI over a 10GbE interface is supported. This support is extended on ESX Server 3.5 Update 1, ESX Server version 3.5 Update 1 Embedded and ESX Server version 3.5 Update 1 Installable as well.
  • 10 GbE NFS support – NFS over a 10GbE interface is supported.
  • IBM System x3950 M2 – x3950 M2 in a 4-chassis configuration is supported, complete with hardware management capabilities through multi-node Intelligent Platform Management Interface (IPMI) driver and provider. Systems with up to 32 cores are fully supported.  Systems with more than 32 cores are supported experimentally.
  • IPMI OEM extension support – Execution of IPMI OEM extension commands is supported.
  • System health monitoring through CIM providers – More Common Information Model (CIM) providers are added for enhanced hardware monitoring, including storage management providers provided by QLogic and Emulex.  LSI MegaRAID providers are also included and are supported experimentally.
  • CIM SMASH/Server Management API – The VMware CIM SMASH/Server Management API provides an interface for developers building CIM-compliant applications to monitor and manage the health of systems.  CIM SMASH is now a fully supported interface on ESX Server 3.5 and VMware ESX Server 3i.
  • Display of system health information – More system health information is displayed in VI Client for both ESX Server 3.5 and VMware ESX Server 3i.
  • Remote CLI – Remote Command Line Interface (CLI) is now supported on ESX Server 3.5 as well as ESX Server 3i. See the Remote Command-Line Interface Installation and Reference Guide for more information.

One of the important thing in my opinion is the full support for the CIM Smash API! And iSCSI over a 10GBe interface, same goes for NFS! 8GB fibre and SAS arrays is a great extension.

  • VMware High Availability – VirtualCenter 2.5 update 2 adds full support for monitoring individual virtual machine failures based on VMware tools heartbeats. This release also extends support for clusters containing mixed combinations of ESX and ESXi hosts, and minimizes previous configuration dependencies on DNS.
  • VirtualCenter Alarms – VirtualCenter 2.5 Update 2 extends support for alarms on the overall health of the server by considering the health of each of the individual system components such as memory and power supplies. Alarms can now be configured to trigger when host health degrades.
  • Guided Consolidation – now provides administrators with the ability to filter the list of discovered systems by computer name, IP address, domain name or analyzing status. Administrators can also choose to explicitly add physical hosts for analysis, without waiting for systems to be auto-discovered by the Consolidation wizard. Systems can be manually added for analysis by specifying either a hostname or IP address. Multiple hostnames or IP addresses, separated by comma or semi-colon delimiters, may also be specified for analysis. Systems can also be manually added for analysis by specifying an IP address range or by importing a file containing a list of hostnames or IP addresses that need to be analyzed for consolidation. Guided Consolidation also allows administrators to override the provided recommendations and manually invoke the conversion wizard.
  • Live Cloning – VirtualCenter 2.5 Update 2 provides the ability of creating a clone of a powered-on virtual machine without any downtime to the running virtual machine. Therefore, administrators are no longer required to power off a virtual machine in order to create a clone of it.
  • Single Sign-On – You can now automatically authenticate to VirtualCenter using your current Windows domain login credentials on the local workstation, as long as the credentials are valid on the VirtualCenter server. This capability also supports logging in to Windows using Certificates and Smartcards. It can be used with the VI Client or the VI Remote CLI to ensure that scripts written using the VI Toolkits can take advantage of the Windows credentials of your current session to automatically connect to VirtualCenter.

One of the best new features described above in my opinion is the extension of Alarms! It’s awesome that VirtualCenter will report on hardware health! But what about that live cloning, that will definitely come in handy when troubleshooting a live production environment. Just copy the server, start it without the network attached and try to solve the problem!

DOWNLOAD it now:

ESX 3.5 Update 2
ESXi 3.5 installable Update 2
VirtualCenter 2.5 Update 2
VMware Consolidated Backup 1.5

File Level Recovery from within a VMDK backup

· ·

Today there was a cool article released on the Storage Nuts & Bolts blog. It’s about file level recovery from within a VMDK based on an NFS datastore. NFS is just mentioned cause this is the preferred way to go for the NetApp family, but it doesn’t matter NFS or VMFS the solution they came up with works for the both of them.

This option was recently discovered and further developed (Registry entries and Batch script) by one of the NetApp SE’s (Mike Arndt) and it’s very effective and free for those customers that already have a CIFS license with their NetApp arrays, which is a very large percentage. The other important factor is that Mike has made it a point-and-click process. Great job Mike!!!

As part of their VMware Disk Developer’s Kit, VMware provides a vmware-mount.exe utility that allows for mounting an existing VMDK on a Windows Driver letter. We’ll be using this utility as well to mount the VMDK as well as some Registry Entries and a Batch Script to further simplify the file recovery process.

I don’t to republish the complete article, so visit the blog and use the script and registry settings these guys created. Especially the first option with registry settings, which give you the possibility to mount a VMDK with just a “right click – mount” action is great!

VCB and Solaris 32 Bit VM’s

· ·

One of my readers just emailed me the following, again thanks for this info which might me useful to any of you guys out there playing with VCB:

Today with the help of VMware Support I solved a strange problem.
With all my Solaris10-32Bit VM’ s I was getting an error, when I tried to backup them via VCB. Creating snapshot of the VM failed with “Creating a quiesced snapshot failed because the (user-supplied) custom pre-freeze script in the virtual machine exited with a non-zero return code”. But there doesn’t exists a pre or post script in all of the VMs.

So as you know, no snapshot means no backup of this VM. I monitored the hostd of the host, where the VM is running. There I saw this messages: ” Could not run custom freeze/thaw operation: Insufficient permissions in guest operating system”.

VMware support told me, that there is a problem within the VMTools in the Solaris VM’s. They know about this problem (I didn’t find anything about this in the internet) and will solve it in a future patch.

For now, the only way is to use the “-Q 0” switch with the vcbmounter command. This way VCB will ignore any pre or post scripts.

Christoph P.

So in short, -Q 0 disregards any pre or post scripts. Thanks Christoph for contributing to my blog!

Selective VCB fullvm images

· ·

During the VMware course DSA I discovered that it is in fact possible to dump specific vmdk’s with the use of the default VCB tools. While I was finding out a way to script this I was notified in one of my blogs by JTurver(Justin Turver) that he already wrote a script that could do what I was looking for. It’s a great script for dumping all system disks and leaving the disk that are filled with data alone. You can use a text file as input for the vbs script. Check out his blog on the VMware website! Great work and thanks for pointing me out!

VCB: I forgot all about “automount disable” what now?

· ·

Before installing VCB and connecting the proxy host to the SAN you should disable automount via diskpart(cmd, diskpart, automount disable, automount scrub). When you don’t disable automount Windows will signature all “incoming” disks. When this happens the VMware hosts will not recognize the VMFS volumes anymore. But fortunately you can re-label the luns as VMFS.

Check with “fdisk -lu” what the current ID value is of the volumes, it’s “SFS” if Windows wrecked it. Write all the devices down and label them again as VMFS:
fdisk /dev/sd? (? the letter for that specific volume)

p
d
n
p
1
default
t
fb
X
b
1
128 (disk alignment, check your SAN manual for the correct value, 128 is correct in most cases…)
W

Now rescan the HBA devices, esxcfg-rescan vmhba0 etc etc.