# Regional Settings keyboard us lang en_US langsupport --default en_US timezone Europe/Amsterdam # Installatition settings skipx mouse none firewall --disabled # Unencrypted root password: rootpw --iscrypted reboot install # Driver disks # Load drivers # Bootloader options bootloader --location=mbr --driveorder=sda # Authentication auth --enableshadow --enablemd5 # Partitioning clearpart --all --drives=sda --initlabel part /boot --fstype ext3 --size=250 --ondisk sda --asprimary part / --fstype ext3 --size=6144 --ondisk sda --asprimary part /var/log --fstype ext3 --size=2048 --ondisk sda part swap --size=1600 --ondisk sda --asprimary part /tmp --fstype ext3 --size=1024 --ondisk sda part None --fstype vmkcore --size=110 --ondisk sda part None --fstype vmfs3 --size=1 --grow --ondisk sda # Network Configurations # VARIABEL network --device eth0 --bootproto static --ip 10.40.254.201 --netmask 255.255.254.0 --nameserver 10.40.1.251 --hostname esx01.yellow-bricks.local --addvmportgroup=0 # VMWare License options vmaccepteula vmlicense --mode=server --server=27000@vc01.yellow-bricks.local --edition=esxfull --features=backup,vsmp %vmlicense_text %packages @base %post cat > /tmp/esxcfg.sh < /etc/ssh/sshd_config /etc/init.d/sshd restart # Upsize console memory mv -f /etc/vmware/esx.conf /etc/vmware/esx.conf.old /bin/sed -e 's/boot\/memSize = \"272\"/boot\/memSize = \"800\"/g' /etc/vmware/esx.conf.old >> /etc/vmware/esx.conf mv -f /boot/grub/grub.conf /tmp/grub.conf.bak /bin/sed -e 's/uppermem 277504/uppermem 818176/g' -e 's/mem=272M/mem=800M/g' /tmp/grub.conf.bak >> /boot/grub/grub.conf # DNS and Gateway mv /etc/resolv.conf /etc/resolv.conf.old echo "search yellow-bricks.local" >> /etc/resolv.conf echo "nameserver 10.40.1.251" >> /etc/resolv.conf echo "nameserver 10.40.1.252" >> /etc/resolv.conf echo "GATEWAY=10.40.254.1" >> /etc/sysconfig/network # set uselunreset enabled and devicereset disabled /usr/sbin/esxcfg-advcfg -s 0 /Disk/UseDeviceReset /usr/sbin/esxcfg-advcfg -s 1 /Disk/UseLunReset # set queuedepth for qlogic adapter /usr/sbin/esxcfg-module -s ql2xmaxqdepth=64 qla2300_707_vmw.o /usr/sbin/esxcfg-boot -b # add nic on vSwitch0 /usr/sbin/esxcfg-vswitch -L vmnic3 vSwitch0 # create vswitch1 with additonal nic and portgroup /usr/sbin/esxcfg-vswitch -a vSwitch1 /usr/sbin/esxcfg-vswitch -A "Server vlan 10" vSwitch1 /usr/sbin/esxcfg-vswitch -L vmnic1 vSwitch1 /usr/sbin/esxcfg-vswitch -L vmnic4 vSwitch1 # Create vSwitch2 with VMkernel and add vmnic2 and vmnic5 /usr/sbin/esxcfg-vswitch -a vSwitch2 /usr/sbin/esxcfg-vswitch -A VMotion vSwitch2 /usr/sbin/esxcfg-vswitch -L vmnic2 vSwitch2 /usr/sbin/esxcfg-vswitch -L vmnic5 vSwitch2 /usr/sbin/esxcfg-vmknic -a VMotion -i 10.40.199.201 -n 255.255.255.0 sleep 3 # Refresh the network settings with vimsh /usr/bin/vimsh -n -e "hostsvc/net/refresh" /usr/bin/vimsh -n -e "internalsvc/refresh_network" # Active and standby setup and set maxActive mv /etc/vmware/esx.conf /tmp/esx.conf.bak /bin/sed -e 's/net\/vswitch\/child\[0001\]\/teamPolicy\/maxActive = \"1\"/net\/vswitch\/child\[0001\]\/teamPolicy\/maxActive = \"2\"/g' /tmp/esx.conf.bak >> /etc/vmware/esx.conf /usr/bin/vimsh -n -e "hostsvc/net/portgroup_set --nicorderpolicy-active=vmnic2 --nicorderpolicy-standby=vmnic5 vSwitch2 VMotion" /usr/bin/vimsh -n -e "hostsvc/net/portgroup_set --nicorderpolicy-active=vmnic0 --nicorderpolicy-standby=vmnic3 vSwitch0 'Service Console'" /usr/bin/vimsh -n -e "hostsvc/net/refresh" /usr/bin/vimsh -n -e "internalsvc/refresh_network" # Enable IP Hash and 2 active nics on vSwitch1 /usr/sbin/esxcfg-vswitch -U vmnic1 vSwitch1 sleep 3 /usr/sbin/esxcfg-vswitch -U vmnic4 vSwitch1 sleep 3 /usr/sbin/esxcfg-vswitch -L vmnic1 vSwitch1 sleep 3 /usr/sbin/esxcfg-vswitch -L vmnic4 vSwitch1 sleep 5 /usr/bin/vimsh -n -e "hostsvc/net/refresh" /usr/bin/vimsh -n -e "internalsvc/refresh_network" /usr/bin/vimsh -n -e "hostsvc/net/vswitch_setpolicy --nicteaming-policy=loadbalance_ip vSwitch1" # VLAN ID for portgroups /usr/sbin/esxcfg-vswitch -p "Server vlan 10" -v 10 vSwitch1 /usr/sbin/esxcfg-vswitch -p VMotion -v 199 vSwitch2 sleep 5 /usr/bin/vimsh -n -e "hostsvc/net/refresh" /usr/bin/vimsh -n -e "internalsvc/refresh_network" # Fill Host file rm -rf /etc/hosts echo "# Do not remove the following line, or various programs" >> echo /etc/hosts echo "# that require network functionality will fail." >> /etc/hosts echo "127.0.0.1 localhost.localdomain localhost" >> /etc/hosts echo "10.40.254.201 esx01.yellow-bricks-nhn.local esx01" >> /etc/hosts echo "10.40.254.202 esx02.yellow-bricks.local esx02" >> /etc/hosts echo "10.40.254.200 vc01.yellow-bricks.local vc01" >> /etc/hosts # Enable and configure ntp /usr/sbin/esxcfg-firewall --enableService ntpClient mv /etc/ntp.conf /etc/ntp.conf.old mv /etc/ntp/step-tickers /etc/ntp/step-tickers.old echo "restrict 127.0.0.1" >> /etc/ntp.conf echo "restrict default kod nomodify notrap" >> /etc/ntp.conf echo "server 10.40.254.11" >> /etc/ntp.conf echo "server 10.40.254.12" >> /etc/ntp.conf echo "driftfile /var/lib/ntp/drift" >> /etc/ntp.conf echo "10.40.254.11" >> /etc/ntp/step-tickers echo "10.40.254.12" >> /etc/ntp/step-tickers /sbin/chkconfig --level 345 ntpd on /etc/init.d/ntpd restart /sbin/hwclock --systohc # Enable VMotion /usr/bin/vimsh -n -e "hostsvc/vmotion/vnic_set vmk0" /etc/init.d/mgmt-vmware restart EOF1 /bin/chmod 755 /tmp/esxcfg.sh cp /etc/rc.d/rc.local /etc/rc.d/rc.local.bak cat >> /etc/rc.d/rc.local <